Journal of the Audio Engineering Society

2002 September - Volume 50 Number 9

Papers


Using the 10-dB switch of a condenser microphone in an audio frequency circuit produces a change in its linear (reduction in signal output) and nonlinear behavior. Two classical options are available to reduce the input voltage of the field effect transistor (FET) or the vacuum tube by adding a parallel capacitor or by reducing the polarizing voltage. The effects of both are described theoretically and practically.

Download: PDF (143.95 KB)

Many frequency domain audio tests, such as measuring the frequency response, measuring frequency-dependent crosstalk, or making some kind of distortion measurements, can be performed by applying multitone test signals to the audio device under test and analyzing the output signal by means of the discrete Fourier transform. In contrast to standardized single-tone or dual-tone excitation tests, the multitone test offers significant time savings and enables realistic test conditions by approximating the frequency domain characteristics of a typical program material. But multitone testing requires the design of low-crest-factor test signals. Several computation schemes and indirect optimization methods of low-crest-factor phases, are discussed, and for the first time optimum multitone signals designed by general-purpose nonlinear optimization software are presented.

Download: PDF (276.68 KB)

The equipment impairment factor methodology adopted by the ITU-T for describing perceptual quality degradations associated with nonwaveform telephone speech codecs is discussed with regard to other degradations of the transmission channel. A new algorithm allows such factors to be calculated from the results of auditory tests, and first steps toward a derivation by means of instrumental models are presented. Limitations of the current approach for codec tandems are pointed out.

Download: PDF (189.69 KB)

Spatial quality in reproduced sound is a subset of the broad topic of sound quality. In the past it has been studied less rigorously than other aspects of reproduced sound quality, leading to a lack of clarity in standard definitions of subjective attributes. Rigor in the physical measurement of sound signals should be matched by equal rigor in semantics relating to subjective evaluation. A scene-based paradigm for the description and assessment of spatial quality is described, which enables clear distinctions to be made between elements of a reproduced sound scene and will assist in the search for related physical parameters.

Download: PDF (202.95 KB)

Engineering reports


About the 10-dB Switch of a Condenser Microphone in Audio Frequency Circuits

Download: PDF (143.95 KB)

Standards and Information Documents


AES Standards Committee News

Download: PDF (29.04 KB)

AES Standards Committee News

Download: PDF (12.52 KB)

Features


21st Conference Report, St. Petersburg

23rd Conference, Copenhagen, Call for Papers

Download: PDF (19.75 KB)

24th Conference, Banff, Call for Contributions

Download: PDF (21.98 KB)

Departments


Review of Acoustical Patents

Download: PDF (152.41 KB)

News of the Sections

Download: PDF (117.73 KB)

Sound Track

Download: PDF (18.81 KB)

Upcoming Meetings

Download: PDF (23.14 KB)

New Products and Developments

Download: PDF (236.91 KB)

Available Literature

Download: PDF (13.29 KB)

Membership Information

Download: PDF (681.24 KB)

Advertiser Internet Directory

Download: PDF (25.39 KB)

In Memoriam

Download: PDF (22.7 KB)

AES Special Publications

Download: PDF (87.5 KB)

Sections Contacts Directory

Download: PDF (37.66 KB)

AES Conventions and Conferences

Download: PDF (49.46 KB)

Extras


Cover & Sustaining Members List

Download: PDF (32.59 KB)

VIP List & Editorial Staff

Download: PDF (28.49 KB)

Institutional Subscribers: If you would like to log into the E-Library using your institutional log in information, please click HERE.

Choose your country of residence from this list:










Skip to content