This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Originally prepared for use as a student textbook in Radiological Defense (RADEF) courses, this manual provides the basic technical information necessary for an understanding of RADEF. It also briefly discusses the need for RADEF planning and expected postattack emergency operations. There are 14 chapters covering these major topics: introduction…

This second in a series of eight modules for a course titled Metrology dscribes fixed gages, dividers, calipers, vernier and dial calipers, and micrometers. The module follows a typical format that includes the following sections: (l) introduction, (2) module prerequisites, (3) objectives, (4) notes to instructor/student, (5) subject matter, (6)…

This third in a series of eight modules for a course titled Metrology describes gage blocks and mechanical and electronic comparators. The module follows a typical format that includes the following sections: (1) introduction, (2) module prerequisites, (3) objectives, (4) notes to instructor/student, (5) subject matter, (6) materials needed, (7)…

This sixth in a series of eight modules for a course titled Metrology describes the principles on which calibration programs are developed, no matter which instruments are included in the calibration program. The module follows a typical format that includes the following sections: (1) introduction, (2) module prerequisites, (3) objectives, (4)…

This eighth in a series of eight modules for a course titled Metrology describes the overall metrology program and the associated typical responsibilities of the quality assurance/quality control technician. The module follows a typical format that includes the following sections: (1) introduction, (2) module prerequisites, (3) objectives, (4)…

This first in a series of eight modules for a course titled Metrology describes the fundamentals of metrology as they pertain to dimensional inspection. The module follows a typical format that includes the following sections: (1) introduction, (2) module prerequisites, (3) objectives, (4) notes to instructor/student, (5) subject matter, (6)…

This fourth in a series of eight modules for a course titled Metrology describes the universal bevel protractor and the sine bar, the engineering microscope and optical projector, and several types of surface texture gages. The module follows a typical format that includes the following sections: (1) introduction, (2) module prerequisites, (3)…

This fifth in a series of eight modules for a course titled Metrology describes the application of the American National Standard (ANSI Y14.5-1973) for dimensioning and tolerancing and gives guidance on interpreting form and location controls consistent with the national standard. The module follows a typical format that includes the following…